Satel WIRELESS SYSTEM CONTROLLER/ABAX 2 ACU-220

Apraksts - ACU-220 ABAX 2 wireless system controller The ACU-220 uses the 868 MHz radio band, in which 4 channels have been allocated. Communication between ABAX 2 system elements is encrypted (AES standard) and bi-directional - all transmissions are confirmed. The controller is compatible with control panels of INTEGRA, INTEGRA Plus and VERSA families (connection via communication bus), enabling extension of the alarm system with wireless devices. It is also possible to operate with other, any control panels, automation controllers (using the Modbus RTU communication protocol or programmable inputs and outputs of the module) or autonomously. The ACU-220 meets the high Grade 2 requirements of the EN 50131 standard. An advantage of the controller is its excellent transmission range, which can reach up to 2,000 m in an open area - depending on the device cooperating with the controller and their operating conditions. Such good communication parameters have been achieved through the use of a modern radio system and the diversification of antennas. Depending on the level of the received radio signal, the ACU-220 automatically selects the optimum antenna to be used to receive the transmission. Configuration of system settings takes place in the ABAX 2 Soft software installed on a computer, which also has extensive diagnostic capabilities. When working with INTEGRA, INTEGRA Plus and VERSA control panels, the configuration is made in the DLOADX program or by means of the keypad. Changing the settings, as well as updating the software of the logged-in wireless devices is done by radio, without the need to disassemble them. Compliance with EN 50131 Grade 2 requirements Two-way radio communication in the 868 MHz band 4 channels Range up to 2000 m in open field Supports up to 48 wireless devices Supports wireless keypads: INT-KWRL2 up to 4, VERSA-KWRL2 up to 6 Supports up to 256 APT-200 wireless keyfobs Cooperation with INTEGRA, INTEGRA Plus and VERSA family control panels, connection to communication bus Option for standalone operation or with any control panel/controller 8 programmable outputs 4 programmable inputs Integration with e.g. automation or data acquisition systems using Modbus RTU communication protocol connection via RS-485 bus 4 outputs signalling the status of the controller and connected wireless devices Antenna diversification automatic selection of the antenna to be used for transmission reception, depending on the level of the received signal Controller settings programming via: Control panel service menu or DLOADX software - when working with INTEGRA, INTEGRA Plus or VERSA families of control panels. ABAX 2 Soft - when the controller operates as a universal module of wireless devices (autonomously or with any control panel/controller).
Apraksts - ACU-220 uses the 868 MHz radio band, in which 4 channels have been allocated. Communication between components of the ABAX 2 system is encrypted (AES standard) and two-way, all transmissions being acknowledged. The controller works together with the INTEGRA, INTEGRA Plus and VERSA control panels (connection via communication bus), making expansion of the alarm system possible by adding wireless devices. It can also interact with any other alarm control panel, automation controller (when using programmable zones and outputs of the module), or work in stand-alone mode. ACU-220 meets the high EN 50131 requirements for Grade 2. An advantage of the controller is its excellent transmission range, which can be up to 2000 m in the open area, depending on the device working with the controller and their operating conditions. Such good communication parameters are obtained thanks to the use of a modern radio system and antenna diversity. Depending on the level of received radio signal, ACU-220 automatically selects the optimal antenna to be used to receive the transmission. The system settings are configured in the ABAX 2 Soft program, which is installed on the computer and has also extensive diagnostic capabilities. When working with the INTEGRA, INTEGRA Plus and VERSA control panels, the DLOADX program or a keypad are used for the configuration. The settings can be changed and the firmware of enrolled wireless devices can be updated by radio, without having to demount them. - compliance with the EN 50131 Grade 2 requirements - two-way radio communication in the 868 MHz band - 4 channels - range up to 2000 m in the open area - support for up to 48 wireless devices - support for wireless keypads: INT-KWRL2 - up to 4, VERSA-KWRL2 - up to 6 - support for up to 256 APT-200 wireless keyfobs - works together with the INTEGRA, INTEGRA Plus and VERSA control panels - connection to the communication bus - option of autonomous operation or with any alarm control panel / controller - 8 programmable outputs - 4 programmable zones - 4 outputs indicating the state of controller and connected wireless devices - antenna diversity - automatic selection of the antenna that will be used to receive the transmission, depending on the level of received signal - programming controller settings via: - service menu of the control panel or DLOADX program - when working with the INTEGRA, INTEGRA Plus or VERSA control panels - ABAX 2 Soft program - when the controller is working as a universal module of wireless devices (in stand-alone mode or with any control panel/controller) - firmware update without demounting of the controller - remote configuration and updating of devices registered to the controller - tamper protection - power supply: 12 V DC
Citas funkcijas - Operating temperature range: -10°C...+55°C Standby current consumption: 75 [mA]. Maximum current consumption: 100 [mA] Maximum humidity: 933% Operating frequency band: 868.0 ÷ 868.6 [MHz]. Security level according to EN50131-3: Grade 2 OC type outputs: 50 mA / 12 V DC Controller software update without disassembly Remote configuration and update of devices registered to the controller Sabotage protection
Diapazons - 2000 m
dimensijas dziļums - 40 mm
dimensionalWeight - 214
ean - 5905033336001
Funkcijas - daudzums iepakojumā - 1 gab.
Funkcijas - Ierīces tips - Alarm receiver
Funkcijas - Produkta krāsa - Zaļā
Funkcijas - Produkta tips - Relay module
Funkcijas - Zīmolu saderība - Satel
garantija - 24
Garantija - 36 mēneši
garantijas_tips - normāli
garantijaType - G
guaranteeLength - 24
Iekļautie piederumi -
Izmēri - Enclosure dimensions 126 x 158 x 32 mm; Board dimensions 103 x 139 mm
Izmēri - Housing dimensions: 126 x 158 x 32 mm Electronics board dimensions: 103 x 139 mm
izmērs augstums - 140 mm
izmērs platums - 170 mm
izmērs svars - 300 g
Jauda - Ieejas spriegums - 12 V
Jauda - Sprūda strāva - 100 mA
Kategorijas kods - ADM
Krāsa - White
nosaukums - Wireless system control Abax 2 ACU-220
Piegādes kastes augstums Piegādes/iepakojuma kastes izmēri - 14 cm
Piegādes kastes daudzums - 1
Piegādes kastes dziļums Piegādes/iepakojuma kastes izmēri - 17.5 cm
Piegādes kastes platums Piegādes/iepakojuma kastes izmēri - 4.5 cm
Piegādes kastes svars Piegādes/iepakojuma kastes izmēri - 0.3 kg
Pilna apraksta līnija - Dimensions Enclosure dimensions 126 x 158 x 32 mm; Board dimensions 103 x 139 mm|Unit Brutto Volume 0.001102 cubm
Power - Mains
Power - Auxiliary current - 75 mA
producerCode - ABAX 2 - ACU-220
productName - Satel ACU-220 alarm / detector accessory
productSize - Parasts
Pārdevēja mājas lapa - www.satel.pl/en/produktid/1096
ražotājs - Satel
sizeX - 170
sizeY - 140
sizeZ - 45
Svars - 222 g
svars - 299
Svars un izmēri - Augstums - 158 mm
Svars un izmēri - Dziļums - 32 mm
Svars un izmēri - Platums - 126 mm
Svars un izmēri - Svars - 222 g
vendpn - ACU-220
Vides prasības - Environmental class in accordance with EN50130-5 II Standards met: EN 50130-4, EN 50130-5, EN 50131-1, EN 50131-3, EN 50131-5-3
Vienība Neto svars - 0.222 kg
Vienības bruto svars - 0.3 kg
Vienības kastes augstums - 0.14
Vienības kastes garums - 0.175
Vienības kastes platums - 0.045
Vienība Slikts tilpums - 0,001102 kubikmetru
Īpašās funkcijas -