Lexar NM790, 2TB, M.2 Gen4 x4

Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
Recommended
ID: 965552 Product code: LNM790X002T-RNNNG
In stock >50 units / In office 3 units
Warranty: 3 years
170.17 €
Delivery options More about shipping
  • Delivery to Omniva parcel machine free of charge: on Thursday, 02.05.2024
  • Piegāde uz DPD Pickup Paku Skapi free of charge: on Thursday, 02.05.2024
  • Delivery to Latvian post office, parcel locker or Circle K free of charge: on Thursday, 02.05.2024
  • Delivery to address in Riga 3.99 €: on Thursday, 02.05.2024
  • Delivery to address in Latvia 6.99 €: on Thursday, 02.05.2024
  • Delivery to Dateks.lv parcel drop-off point at 9 Zemitāna Street: on Monday, 29.04.2024 sākot no 9:00
Main product parameters All parameters
  • Capacity: 2 TB
  • Type: NVMe
  • Read speed (sequential): 7400 MB/s
  • Write speed (sequential): 6500 MB/s
  • Form factor: M.2 80mm (2280)
  • Interface: PCIe 4.0 x4
Description
We offer to buy the Lexar SSD disc with 2 TB data capacity and M.2 port.



The additional advantages that can be provided by the SSD technology are based on the unique design of this disc. SSD discs save the data in memory chips distinguished by totally silent operation, low temperature and electricity consumption. All these features permit to feel the essential difference from the currently obsolete technology of hard discs.
Basic information
Capacity 2 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type : NVMe
Read speed (sequential) 7400 MB/s

Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.

If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.

Write speed (sequential) 6500 MB/s

The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.

Functionality
Radiators : Nav
Lighting : Nav
Ports and equipment
Form factor M.2 80mm (2280)

Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at Dateks.lv section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.

1.8" discs are intended for the ultra-compact class portable computers.

PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.

Interface : PCIe 4.0 x4
Interface M.2

SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.

The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.

Specifikācija
Memory type : TLC (Triple-Level Cell)
Random Read IOPS : 1m
Random Write IOPS : 900K
Endurance (TBW) : 1500 TB
More detailed specification
Box Weight Brutto (kg) - 0 kg
Category - Root/Electronics/PC parts/Hard drives
Category 1 - SSDs
Category 2 - Interne SSDs
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
CnCode CnCode - 84717098
Code - LNM790X002T-RNNNG
Color - Not applicable
Depth - 80 mm
Depth (mm) - 80 mm
Description - Incredible Speeds to Get the Job Done With a blazing 7400MB/s sequential read, 6500MB/s sequential write, and random read speeds of up to 1,000,000 IOPs, the Lexar NM790 SSD has the performance to put you across the finish line first or easily meet your most demanding deadlines.
Description - Lexar NM790 M.2 2280 PCIe Gen 4×4 NVMe SSD
Design > SSD form factor - M.2 2280
Device Location - Plug-in Module
dimensionalWeight - 51
dimension depth - 20 mm
dimension height - 170 mm
Dimensions - 80 x 22 x 2.45 mm
dimension weight - 46 g
dimension width - 100 mm
Disk type - SSD
Drive thickness - 2.45mm
Drive type - Internal
EAN - 843367130290
ean - 843367130290
EAN - 0843367130290
EAN Code - 843367130290
Eans - 843367130290
EAN_code - 0843367130290
Features - Component for - PC/Laptop
Features - Interface - PCI Express 4.0
Features - Lithography - 12 nm
Features - Mean time between failures (MTBF) - 1500000 h
Features - Memory type - SLC
Features - NVMe - Yes
Features - NVMe version - 1.4
Features - PCI Express interface data lanes - x4
Features - Protection features - Shock resistant
Features - Protection features - Vibration proof
Features - Read speed - 7400 MB/s
Features - SSD capacity - 2 TB
Features - SSD form factor - M.2
Features - Write speed - 6500 MB/s
Flash Memory Cell Technology - Single-Level Cell
Form Factor - M.2
Form Factor - M.2 22x80mm
Form factor (width) - M.2 2280
Full Description Line - SSD series NM790|2TB|Form Factor M.2|PCIe Gen4|NVMe|Write speed 6500 MBytes/sec|Read speed 7400 MBytes/sec|Drive thickness 2.45mm|TBW 1500 TB|MTBF 1500000 hours
guarantee - 60
guarantee_type - normal
HDD capacity - 2 TB
HDD interface - PCI-Express
Height - 2.45 mm
Height (mm) - 2.45 mm
Image - https://content.it4profit.com/pimg/s/resize/600x600x600x600/230908160011729075.jpg
Included Accessories - Īsa lietotāja rokasgrāmata
Link - https://www.lexar.com/product/lexar-nm790-m-2-2280-pcie-gen-4x4-nvme-ssd/
Manufacturer - Lexar
Manufacturer - Lexar Media
Manufacturer_code - LNM790X002T-RNNNG
Maximum Non-Operating Ambient Temperature - 85 °C
Maximum Operating Ambient Temperature - 70 °C
Maximum Sequential Read Rate - 7400 MB/s
Maximum Sequential Write Rate - 6500 MB/s
Mean Time Between Failures - 1500000 hr
Memory Technology - NAND Flash
Minimum Non-Operating Ambient Temperature - -40 °C
Minimum Operating Ambient Temperature - 0 °C
Model - LNM790X002T-RNNNG
Model - NM790
MPN - LNM790X002T-RNNNG
MTBF - 1.5e+006 hours
Name - Lexar NM790 2TB, SSD (PCIe 4.0 x4, NVMe 1.4, M.2 2280)
Name - Lexar NM790 Pci-e NVMe 2TB
Name - Lexar | SSD | NM790 | 2000 GB | SSD form factor M.2 2280 | SSD interface M.2 NVMe | Read speed 7400 MB/s | Write speed 6500 MB/s
Name - M.2 2TB Lexar NM790 High Speed NVMe PCIe4.0 x 4
name - SSD NM790 2TB 2280 PCIeGen4x4 7400/6500MB/s
Nominal Weight - 6 g
NVMe - Yes
Operational conditions - Maximum operating temperature - 70 °C
Operational conditions - Operating shock - 1500 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Operational conditions - Vibration resistance - 20 G
Other features - Operating temperature: 0° to 70° C (32°F to 158°F) Storage temperature: -40° to 85° C (-40°F to 185°F)
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 80.00 mm
Package features > Gross height (mm) - 2.45 mm
Package features > Gross width (mm) - 22.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 1000 pc(s)
Package features > Paper/Pasteboard - 8.00 g
Package features > PET - 20.00 g
Package features > Plastic (No PET) - 2.00 g
Package features > Tare weight (kg) - 0.01 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Package Type - Retail
Packs in Box - 1
Pack Weight Brutto (kg) - 0 kg
Pack Weight Netto (kg) - 0.006 kg
PCIe Gen4 Interface - Yes
Performance > Read speed - 7400 MB/s
Performance > Solid-state drive capacity - 2000 GB
Performance > Solid-state drive interface - M.2 NVMe
Performance > Write speed - 6500 MB/s
Pieces in pack - 1
Ports & interfaces > Interface - PCIe Gen 4.0 x4
producer - Lexar
Producer - Lexar
producerCode - LNM790X002T-RNNNG
ProducerCode - LNM790X002T-RNNNG
Producer product family - SSD
Producer product name - NM790
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=230516122711854117&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - LNM790X002T-RNNNG
ProductDescription - Lexar 2TB High Speed PCIe Gen 4X4 M.2 NVMe, up to 7400 MB/s read and 6500 MB/s write, EAN: 843367130290
productName - Lexar NM790 M.2 2 TB PCI Express 4.0 SLC NVMe
productSize - Normal
ProductType - SSD Client
Reading speed - 7400 MB/s
Read speed - 7400 MBytes/sec
Retail Packaging Net Weight Carton - 0.006 kg
Retail Packaging Net Weight Plastic - 0.006 kg
Shipping Box Depth Shipping/Package Box Dimensions - 16 cm
Shipping Box Height Shipping/Package Box Dimensions - 1 cm
Shipping box quantity - 1
Shipping Box Weight Shipping/Package Box Dimensions - 0.047 kg
Shipping Box Width Shipping/Package Box Dimensions - 10 cm
Shock Tolerance Operating - 1500G @ 0.5ms
ShortDescription - m2 | SSD | 2TB | 7200/6500 MB/s | PCI-e|NVME | TBW
sizeX - 165
sizeY - 15
sizeZ - 105
Solid State Drive Features - NVMe Support
SSD Capacity - 2TB
SSD series - NM790
Storage Capacity - 2 TB
Supports Data Channel - PCIe NVMe 4.0 x4
TBW - 1500 TB
TBW - 1500 TB
Technical details - Warranty period - 5 year(s)
Technical details > Gross weight - 0.02 kg
Technical details > Net weight - 0.01 kg
Technical details > Producer - Lexar
Technical details > Warranty - 36 month(s)
Total Bytes Written (TBW) - 1500 TB
Unit Box Height - 0.01
Unit Box Length - 0.16
Unit Box Width - 0.1
Unit Brutto Volume - 0.00016 cubm
Unit Gross Weight - 0.047 kg
Unit Net Weight - 0.006 kg
Vendor - LEXAR
Vendor Homepage - www.lexar.com/product/lexar-nm790-m-2-2280-pcie-gen-4x4-nvme-ssd/
vendpn - LNM790X002T-RNNNG
Vibration Tolerance Operating - 20G @10-2000Hz
Warranty - 36
Warranty - 60 months
warrantyLength - 60
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
warrantyType - G
Warranty validation Criteria - Serial Number
Weight - 0,05
Weight - 0.06
Weight - 6 g
weight - 50
Weight & dimensions - Depth - 80 mm
Weight & dimensions - Height - 2.45 mm
Weight & dimensions - Weight - 6 g
Weight & dimensions - Width - 22 mm
Width - 22 mm
Width (mm) - 22 mm
Write speed - 6500 MBytes/sec
Writing speed - 6500 MB/s
170.17 €
Lexar NM790, 2TB, M.2 Gen4 x4
Tālr. 67275758 gsm 26117175 (p.o.t.c.p. 9:00-18:00)
Intel technology provider Platinum 2020
All categories