ID: 1441933
Product code: AGI256G25AI238-CB
In stock >50 units
Warranty: 3 years
Agi Technology AI238, 256GB
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
-
Receiving goods at the Dateks office0.00 € -
DPD Pickup Parcel CabinetWithin 1-2 working days0.00 € -
Parcel terminalWithin 1-2 working days0.00 € -
Post OfficeWithin 1-2 working days0.00 €
-
Omniva parcel machineWithin 1-2 working days0.00 € -
SmartPosti parcel terminalWithin 1-2 working days0.00 € -
Unisend parcel terminalWithin 1-2 working days0.00 € -
Delivery throughout Latvia.Within 1-2 working days4.99 €
Main product parameters All parameters
- Capacity: 256 GB
- Type: SATA
- Read speed (sequential): 530 MB/s
- Write speed (sequential): 510 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
Available for purchase, the Agi Technology 2.5" format SSD disk with a large volume of 256 GB.
The disk is equipped with the traditional SATA port. It uses SATA data and power cables.
This is a SATA type SSD disk. It uses the SATA III protocol, which is older technology, however SATA is still a good option for everyday use and budget solutions.
This SSD disk read speed (Sequential read speed) is 530 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.
The write speed (Sequential write speed) of this SSD is 510 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This is an SSD disk in the 2.5" format.
This SSD disk has a SATA III (6Gb/s) interface. Keep in mind that if you insert a disk with a newer interface (for example, with PCIe 4.0 or 5.0) into an older interface slot (for example, PCIe 3.0), the disk speed will decrease because the disk will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
256 GB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
530 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
510 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: None
Lighting
: None
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at Dateks.lv section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specification
Memory type
: SLC (Single-Level Cell)
Random Read IOPS
: Not specified
Random Write IOPS
: Not specified
Endurance (TBW)
: 150 TB
More detailed specification
Category Code - SSM
Compliance certificates Other features - CE, Federal Communications Commission (FCC), BSMI, RoHS
Component for Features - Universal
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 100 mm
Description - AI238 SATA3 SSD
Equipped with 3D NAND Flash, offering higher storage density and longevity than traditional SSDs. Ensure long-term data stability for both daily tasks and high-volume storage. SLC Caching for lightning-fast transfers and seamless performance.
Leveraging SLC Caching to significantly reduce boot times and app launches, ensuring fluid performance and instant responsiveness even under heavy workloads. Comprehensive Monitoring Commands for Long-Term System Stability.
Supports S.M.A.R.T. monitoring and TRIM optimization to prevent performance degradation, with built-in power management and NCQ for smarter, more energy-efficient operation. The Premier Choice for Upgrades: High Compatibility with SATA III.
Fully compatible with all SATA-based laptops and desktops, making it the most cost-effective solution for replacing aging HDDs. A simple installation to revitalize your old PC with peak performance.3D NAND Flash technology provides enhanced durability and capacity.Utilizes SLC Caching to significantly boost transfer speeds.Supports S.M.A.R.T., TRIM, APM, and NCQ commands.
ECC Features - Yes
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Interface Features - Serial ATA III
Maximum operating temperature Operational conditions - 70 °C
Mean time between failures (MTBF) Features - 1500000 h
Memory type Features - 3D NAND
Minimum operating temperature Operational conditions - 0 °C
Native Command Queuing (NCQ) Features - Yes
NVMe Features - No
Operating shock Operational conditions - 1500 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating voltage Power - 5 V
Package depth Packaging data - 131 mm
Package height Packaging data - 16 mm
Package type Packaging data - Hanging box
Package weight Packaging data - 63 g
Package width Packaging data - 101 mm
Read speed Features - 530 MB/s
S.M.A.R.T. support Features - Yes
SSD capacity Features - 256 GB
SSD form factor Features - 2.5"
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - AGI Technology AI238. SSD capacity: 256 GB, SSD form factor: 2.5", Read speed: 530 MB/s, Write speed: 510 MB/s, Data transfer rate: 6 Gbit/s, Component for: Universal
TRIM support Features - Yes
Unit Box Height - 0.02
Unit Box Length - 0.15
Unit Box Width - 0.105
Unit Calculated Volume - 0.0005031 cubm
Unit Calculated Weight - 0.079 kg
Units per Pallet - 0
Units per Shipping Box - 100
Vendor Homepage - https://agi-gear.com/product/ai238-sata-ssd/#sec-2
Warranty - 36 months
Warranty period Other features - 3 year(s)
Weight Weight & dimensions - 45 g
Width Weight & dimensions - 70 mm
Write speed Features - 510 MB/s
Compliance certificates Other features - CE, Federal Communications Commission (FCC), BSMI, RoHS
Component for Features - Universal
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 100 mm
Description - AI238 SATA3 SSD
Equipped with 3D NAND Flash, offering higher storage density and longevity than traditional SSDs. Ensure long-term data stability for both daily tasks and high-volume storage. SLC Caching for lightning-fast transfers and seamless performance.
Leveraging SLC Caching to significantly reduce boot times and app launches, ensuring fluid performance and instant responsiveness even under heavy workloads. Comprehensive Monitoring Commands for Long-Term System Stability.
Supports S.M.A.R.T. monitoring and TRIM optimization to prevent performance degradation, with built-in power management and NCQ for smarter, more energy-efficient operation. The Premier Choice for Upgrades: High Compatibility with SATA III.
Fully compatible with all SATA-based laptops and desktops, making it the most cost-effective solution for replacing aging HDDs. A simple installation to revitalize your old PC with peak performance.3D NAND Flash technology provides enhanced durability and capacity.Utilizes SLC Caching to significantly boost transfer speeds.Supports S.M.A.R.T., TRIM, APM, and NCQ commands.
ECC Features - Yes
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Interface Features - Serial ATA III
Maximum operating temperature Operational conditions - 70 °C
Mean time between failures (MTBF) Features - 1500000 h
Memory type Features - 3D NAND
Minimum operating temperature Operational conditions - 0 °C
Native Command Queuing (NCQ) Features - Yes
NVMe Features - No
Operating shock Operational conditions - 1500 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating voltage Power - 5 V
Package depth Packaging data - 131 mm
Package height Packaging data - 16 mm
Package type Packaging data - Hanging box
Package weight Packaging data - 63 g
Package width Packaging data - 101 mm
Read speed Features - 530 MB/s
S.M.A.R.T. support Features - Yes
SSD capacity Features - 256 GB
SSD form factor Features - 2.5"
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - AGI Technology AI238. SSD capacity: 256 GB, SSD form factor: 2.5", Read speed: 530 MB/s, Write speed: 510 MB/s, Data transfer rate: 6 Gbit/s, Component for: Universal
TRIM support Features - Yes
Unit Box Height - 0.02
Unit Box Length - 0.15
Unit Box Width - 0.105
Unit Calculated Volume - 0.0005031 cubm
Unit Calculated Weight - 0.079 kg
Units per Pallet - 0
Units per Shipping Box - 100
Vendor Homepage - https://agi-gear.com/product/ai238-sata-ssd/#sec-2
Warranty - 36 months
Warranty period Other features - 3 year(s)
Weight Weight & dimensions - 45 g
Width Weight & dimensions - 70 mm
Write speed Features - 510 MB/s
