ID: 1150126
Product code: MTFDDAV960TGA-1BC1ZABYYR
In stock 7 units
Warranty: 3 years
Micron 5400 PRO, 960GB, M.2 SATA
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
-
Receiving goods at the Dateks office0.00 € -
DPD Pickup Parcel CabinetWithin 1-2 working days0.00 € -
Parcel terminalWithin 1-2 working days0.00 € -
Post OfficeWithin 1-2 working days0.00 €
-
Omniva parcel machineWithin 1-2 working days0.00 € -
SmartPosti parcel terminalWithin 1-2 working days0.00 € -
Delivery throughout Latvia.Within 1-2 working days4.99 €
Main product parameters All parameters
- Capacity: 960 GB
- Type: SATA
- Read speed (sequential): 540 MB/s
- Write speed (sequential): 520 MB/s
- Form factor: M.2 80mm (2280)
- Interface: SATA III (6Gb/s)
Description
Available for purchase, the Micron M.2 80mm (2280) format SSD disk with a large volume of 960 GB.
The drive is equipped with the classic SATA port, which requires standard SATA data and power cables.
This is a SATA type SSD disk. It uses the SATA III protocol, which is older technology, however SATA is still a good option for everyday use and budget solutions.
This SSD disk read speed (Sequential read speed) is 540 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.
The write speed (Sequential write speed) of this SSD is 520 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This is an SSD disk in the M.2 80mm (2280) format.
The SSD drive has a SATA III (6Gb/s) interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.
Basic information
Capacity
960 GB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
540 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
520 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Nav
Lighting
: Nav
Ports and equipment
Form factor
M.2 80mm (2280)
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at Dateks.lv section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: 95K
Random Write IOPS
: 33K
Endurance (TBW)
: 2628 TB
More detailed specification
Category Code - SSU
CnCode - 84717098
Component for Features - Laptop
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 3.8 mm
Description - Micron delivers the industry’s most advanced SATA SSD. The Micron 5400 SSD’s proven architecture assures customers of Micron’s commitment to meeting their diverse storage needs. The Industry’s Most Advanced Data Center SATA SSD
The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds.
Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD. With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB. Get More Out of Your SATA Platforms
The Micron 5400 SSD is the world’s first 176-layer data center SATA SSD. It offers the industry’s broadest portfolio with more than enough performance to saturate typical network bandwidth and best-in-class mixed-use write performance (sequential and random writes). Fast and Easy to Qualify
Qualify Micron’s 11th generation data center SATA SSD with confidence, now with 176-layer NAND. It’s a proven and stable architecture trusted for generations by all major server OEMs5 and can be purchased in new servers and is available for upgrade to deployed moderate capacity SATA HDDs. Longer Life & Fewer Field Failures
The Micron 5400 SSD offers industry-leading reliability (MTTF) rating that is 50% higher than the other leading data center SATA SSD.6 It also delivers 50% higher endurance rating on M.2 PRO vs competing M.2, read-intensive data center SATA SSDs and 67% higher endurance rating on MAX vs competing mixed-use, data center SATA SSDs — all backed by Micron’s standard 5-year data center SSD warranty.
Hardware encryption Features - Yes
Harmonized System (HS) code Logistics data - 84717070
Height Weight & dimensions - 80 mm
Interface Features - Serial ATA III
Memory type Features - 3D TLC NAND
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Random read (4KB) Features - 95000 IOPS
Random write (4KB) Features - 33000 IOPS
Security algorithms Features - 256-bit AES
SSD capacity Features - 960 GB
SSD form factor Features - M.2
SSD series - 5400 Pro
Summary - Micron 5400 PRO. SSD capacity: 960 GB, SSD form factor: M.2, Data transfer rate: 6 Gbit/s, Component for: Laptop
Target workload Features - Read Intensive (RI)
Uncorrectable Bit Error Rate (UBER) Features - < 1 per 10^17 bits read
Unit Box Height - 0.005
Unit Box Length - 0.176
Unit Box Width - 0.056
Unit Calculated Volume - 4.928E-05 cubm
Unit Calculated Weight - 0.02 kg
Units per Shipping Box - 1
Vendor Homepage - https://www.micron.com/products/ssd/product-lines/5400
Warranty - 60L months
Weight Weight & dimensions - 10 g
Width Weight & dimensions - 22 mm
CnCode - 84717098
Component for Features - Laptop
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 3.8 mm
Description - Micron delivers the industry’s most advanced SATA SSD. The Micron 5400 SSD’s proven architecture assures customers of Micron’s commitment to meeting their diverse storage needs. The Industry’s Most Advanced Data Center SATA SSD
The Micron 5400 SSD combines Micron’s proven data center SATA architecture with its advanced 176-layer NAND technology to give customers the best of both worlds.
Get more from your SATA platforms with SSDs that have 50% better reliability (mean time to failure, MTTF rating)1 and up to 50% greater endurance than the other leading SATA SSD. With the industry’s broadest portfolio of data center SATA SSDs, the Micron 5400 gives you extensive options to get more out of every SATA socket in your servers. The Micron 5400 SSD is available in capacities ranging from 240GB to 7.68TB. Get More Out of Your SATA Platforms
The Micron 5400 SSD is the world’s first 176-layer data center SATA SSD. It offers the industry’s broadest portfolio with more than enough performance to saturate typical network bandwidth and best-in-class mixed-use write performance (sequential and random writes). Fast and Easy to Qualify
Qualify Micron’s 11th generation data center SATA SSD with confidence, now with 176-layer NAND. It’s a proven and stable architecture trusted for generations by all major server OEMs5 and can be purchased in new servers and is available for upgrade to deployed moderate capacity SATA HDDs. Longer Life & Fewer Field Failures
The Micron 5400 SSD offers industry-leading reliability (MTTF) rating that is 50% higher than the other leading data center SATA SSD.6 It also delivers 50% higher endurance rating on M.2 PRO vs competing M.2, read-intensive data center SATA SSDs and 67% higher endurance rating on MAX vs competing mixed-use, data center SATA SSDs — all backed by Micron’s standard 5-year data center SSD warranty.
Hardware encryption Features - Yes
Harmonized System (HS) code Logistics data - 84717070
Height Weight & dimensions - 80 mm
Interface Features - Serial ATA III
Memory type Features - 3D TLC NAND
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Random read (4KB) Features - 95000 IOPS
Random write (4KB) Features - 33000 IOPS
Security algorithms Features - 256-bit AES
SSD capacity Features - 960 GB
SSD form factor Features - M.2
SSD series - 5400 Pro
Summary - Micron 5400 PRO. SSD capacity: 960 GB, SSD form factor: M.2, Data transfer rate: 6 Gbit/s, Component for: Laptop
Target workload Features - Read Intensive (RI)
Uncorrectable Bit Error Rate (UBER) Features - < 1 per 10^17 bits read
Unit Box Height - 0.005
Unit Box Length - 0.176
Unit Box Width - 0.056
Unit Calculated Volume - 4.928E-05 cubm
Unit Calculated Weight - 0.02 kg
Units per Shipping Box - 1
Vendor Homepage - https://www.micron.com/products/ssd/product-lines/5400
Warranty - 60L months
Weight Weight & dimensions - 10 g
Width Weight & dimensions - 22 mm
