Alarm -
Alarm when on batterydistinctive low battery alarmoverload continuous tone alarm
Alarm - Alarm when on batteryDistinctive low battery alarmOverload continuous tone alarm
ARTIKEL1 - BACK-UPS ES 400VA 230V
ARTIKEL2 - GERMAN/DUTCH IN
Battery - Automatic battery test - Yes
Battery - Battery capacity - 6 Ah
Battery - Battery capacity - 102 VAh
Battery - Battery life (max) - 5 year(s)
Battery - Battery recharge time - 16 h
Battery - Battery technology - Sealed Lead Acid (VRLA)
Battery - Battery voltage - 12 V
Battery - Typical backup time at full load - 5.3 min
Battery - Typical backup time at half load - 18.2 min
Battery recharge time, h - 16
BatteryType - Maintenance-free sealed Lead-Acid battery with suspended electrolyteleakproof
BatteryType - Lead-acid
Brand - APC
BrandPartCode - BE400-CP
BrandPartCode - BE400-GR
Breite - 0.3
Cable length, m - 1.83
Category - Root/Smarthome/Electricity/Power supply/UPSs and power strips/UPSs
Category - Uninterruptible Power Supplies (UPSs)
Certification - CE, GOST, NEMKO
Color - Charcoal
Connections - RJ-11
Connections - RJ-45 10/100 Base-T
ControlPanel - LED Status display with On LineOn Battery
Data line protection - Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Depth - 285 mm
Depth, mm - 285
Description - APC BACK-UPS ES 400VA 230V SCHUKO GERMAN/DUTCH
Design - Cable length - 1.83 m
Design - Certification - BSI 1363, CE
Design - Certification - CE, GOST, NEMKO, REACH, PEP, EOLI
Design - Form factor - Compact
Design - LED indicators - Yes
Design - Product colour - Black
Design - Product colour - Grey
EAN - 0731304233367
EANCode - 0731304233367
Eans - 0731304247562
Features - Audible alarm(s) - Yes
Features - Audible alarm modes - Alarm when on battery, Low battery alarm, Overload alarm
Features - Audible alarm modes - Low battery alarm, Overload alarm
Features - Crest factor - 3:1
Features - Efficiency - 98.7%
Features - Emergency Power Off (EPO) - No
Features - EMI/RFI noise filtering - Yes
Features - Hold time (max) - 10 ms
Features - Hold time (min) - 6 ms
Features - Input frequency - 50/60 Hz
Features - Input operation voltage (max) - 266 V
Features - Input operation voltage (min) - 180 V
Features - Maximum current - 10 A
Features - Noise level - 45 dB
Features - Output frequency regulation - 47 - 63 Hz
Features - Output power - 240 W
Features - Output power capacity - 0.4 kVA
Features - Surge energy rating - 310 J
Features - Surge protection - Yes
Features - Surge protection features - Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone
Features - UPS topology - Standby (Offline)
Features - Waveform - Sine
FormFactor - Tower
Form factor - Tower
Frequency range, Hz - 47 - 63
Gewicht - 6.11
GrossWeight - 5.600 kg
GrossWeight - 5.850 kg
Gross Weight Kg - 5,6
GRUPPE1 - Power Protection
GRUPPE2 - UPS (Uninterruptable Power Supply)
GTIN - 0731304233367
GTIN - 731304233367
GTIN - 731304247562
GTIN - 0731304247562
Height - 86 mm
Height - 298.000000
Height, mm - 86
HERSTELLER - APC
Hoehe - 0.13
HSTNUMMER - BE400-GR
Input connection - Schuko CEE 7/7P
InputConnections - French/Belgian
InputConnections - Schuko CEE 7/7P
Input current, A - 10
InputFrequency - 50/60 Hz
Input frequency, Hz - 50/60
InputVoltage - 230 V
Input voltage, V - 180 - 266
InterfacePorts - -
Laenge - 0.37
Length - 130.000000
Logistics data - Harmonized System (HS) code - 85078000
Logistics data - Products per master (outer) case - 2 pc(s)
Logistics data - Products per pallet - 48 pc(s)
LongDesc -
LongDesc - Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipmentResettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)ProtectionBattery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.AvailabilityIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.ManageabilityLED status displayQuickly understand unit and power status with visual indicators.
LongDesc - Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceSafety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Surge only outletsProtect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Audible alarmsProvides notification of changing utility power and UPS power conditions.LED status displayQuickly understand unit and power status with visual indicators.
LongDesc - APC Back-UPS ES, 400VA/240W, Input 230V/Output 230V
LongProductName - Back-UPS ES - 400VA, 240W, 230V, 60Hz, Czech/Poland
LongProductName - Back-UPS ES 400VA 230V German/Dutch
LongSummaryDescription - APC Back-UPS. UPS topology: Standby (Offline), Output power capacity: 0.4 kVA, Output power: 240 W. AC outlet types: Type F. Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 6 Ah, Battery capacity: 102 VAh. Form factor: Compact, Product colour: Grey, Cable length: 1.83 m. Width: 230 mm, Depth: 285 mm, Height: 86 mm
LongSummaryDescription - APC Back-UPS 400. UPS topology: Standby (Offline), Output power capacity: 0.4 kVA, Output power: 240 W. AC outlet types: Type E, AC outlets quantity: 8 AC outlet(s), Cabling technology: 10/100Base-T. Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 102 VAh, Battery life (max): 5 year(s). Form factor: Compact, Product colour: Black, Cable length: 1.83 m. Width: 230 mm, Depth: 285 mm, Height: 86 mm
Manufacturer - APC
Manufacturer Code - BE400-GR
Manufacturer Name - APC by Schneider Electric
ManufacturerPartNumber - BE400-GR
MANUFDATASHEET - http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BE400-GR&tab=models
MANUFDATASHEET - https://www.apc.com/shop/nl/en/products/APC-Back-UPS-ES-400VA-230V-8-French-Belgian-outlets-4-surge-/P-BE400-CP
Maximum power, W - 240
Name - APC Back BE400-CP
Noise level, dB - 45
Nominal input voltage, V - 230
Nominal output voltage, V - 230
Operating relative humidity range, % - 0 - 95
Operating temperature range (T-T), °C - 0 - 40
Operational conditions - Non-operating altitude - 0 - 15000 m
Operational conditions - Operating altitude - 0 - 15000 m
Operational conditions - Operating relative humidity (H-H) - 0 - 95%
Operational conditions - Operating temperature (T-T) - 0 - 40 °C
Operational conditions - Storage relative humidity (H-H) - 0 - 95%
Operational conditions - Storage temperature (T-T) - 0 - 40 °C
Other features - Filtering - Yes
Other features - Nominal output voltage - 230 V
Other features - Output voltage - 230 V
Other features - Packaging content - Wall-mounting template
OutputConnections - (4) French/Belgian (Surge Protection)(4) French/Belgian (Battery Backup)
OutputConnections - (4) Schuko CEE 7 (Battery Backup)(4) Schuko CEE 7 (Surge Protection)
OutputFrequency - -
OutputFrequency - 47 - 63 Hz
Output interface - 4 x Schuko CEE 7 (Battery Backup), 4 x Schuko CEE 7 (Surge Protection)
Output power, W - 240
Output power capacity (VA) - 400
OutputVoltage - 230 V
PackageContents - User ManualWall-mounting template
Packaging data - Manual - Yes
PeriodofWarranty - 3 Y
Ports & interfaces - AC outlets quantity - 8 AC outlet(s)
Ports & interfaces - AC outlet types - Type E
Ports & interfaces - AC outlet types - Type F
Ports & interfaces - Cabling technology - 10/100Base-T
Ports & interfaces - Ethernet LAN (RJ-45) ports - 1
Ports & interfaces - Modem (RJ-11) ports - 1
Ports & interfaces - Number of type F outputs - 8
PowerVAW - 400 VA
PowerW - 240 W
ProdDesc - APC Back-UPS ES 400VA 230V Czech & Poland
ProdDesc - APC Back-UPS ES 400VA 230V German/Dutch
Producer - APC
ProducerCode - BE400-CP
ProductName - Back-UPS
ProductName - Back-UPS 400
ProductPicture - http://www.tdbaltic.ee/images/ds/BE400-GR.jpg
ProductPicture - http://www.tdbaltic.ee/images/ds4/BE400-CP-01.jpg
ProductPicture2 -
ProductPicture3 -
ProductPicture4 -
RechargeTime - 16 h
RJ45 - -
Runtime - 5 min (full load) / 18 min (half load)
Runtime - 18.1/5.2
ShortDescription -
Short description - APC Back-UPS ES 400 VA BE400-GR
ShortSummaryDescription - APC Back-UPS, Standby (Offline), 0.4 kVA, 240 W, Sine, 180 V, 266 V
ShortSummaryDescription - APC Back-UPS 400, Standby (Offline), 0.4 kVA, 240 W, Sine, 180 V, 266 V
SmartSlot - -
Stck_Kart - 1
Stck_Pal - 35
Storage temperature range (T-T), °C - 0 - 40
Storno - Y
Surge energy rating, J - 310
Technical details - Sustainability certificates - RoHS, ENERGY STAR
Title - APC Back-UPS 400 uninterruptible power supply (UPS) Standby (Offline) 0.4 kVA 240 W 8 AC outlet(s)
Title - APC Back-UPS uninterruptible power supply (UPS) Standby (Offline) 0.4 kVA 240 W
Topology - Offline
UPS devices and accessories - Yes
URL - https://www.apc.com/resource/include/techspec_index.cfm?base_sku=BE400%2DUK&total_watts=200
URL - https://www.apc.com/resource/include/techspec_index.cfm?base_sku=BE400-CP&tab=features
USB - -
Warranty - 3 years
WarrantyInfo - 3 years
WarrantyInfo - 3 years repair or replace
WaveformType - -
WaveformType - Stepped approximation to a sinewave
Weight - 5.400 Kg
Weight - 5.850000
Weight & dimensions - Depth - 285 mm
Weight & dimensions - Height - 86 mm
Weight & dimensions - Package depth - 366 mm
Weight & dimensions - Package height - 132 mm
Weight & dimensions - Package weight - 5.6 kg
Weight & dimensions - Package width - 300 mm
Weight & dimensions - Weight - 5.4 kg
Weight & dimensions - Width - 230 mm
Weight, kg - 5.4
Width - 230 mm
Width - 365.000000
Width, mm - 230